Image 1 of 1
Image 1 of 1
Image 1 of 1
Image 1 of 1
Make tuning your Mathews bow easier without a bow press.
The CT-Pro Cable Tuners were developed by Unbound Archery and Bloodline to give archers a simple way to make cable and timing adjustments without needing a traditional bow press.
Designed to work with any Mathews compound bow from the past 10 years that uses the plastic yoke rings, the CT-Pros make tuning, timing adjustments, and bow setup quicker and more convenient.
FEATURES
• Fits Mathews bows from the past 10 years that use plastic yoke rings
• Allows cable and timing adjustments without a bow press
• Great for bow tuning and setup
• Developed by Unbound Archery + Bloodline
• Built for bowhunters and archers
CABLE REQUIREMENTS
Your existing yokes can remain the same length. You will need new cables built by a string builder, and the cable lengths need to be 1 1/8” shorter than the factory cable length.
SHIPPING
Orders will ship within 1–2 weeks maximum.
IMPORTANT SAFETY DISCLAIMER
Proper installation is the customer’s responsibility.
Always make sure the yokes are fully seated in the CT-Pro Cable Tuners before drawing the bow by hand or using a draw board.
If the yokes are not fully seated, drawing the bow can cause the bow to derail, potentially resulting in serious damage or injury.
DO NOT draw the bow until you have verified that the yokes are properly and completely seated.
Unbound Archery and Bloodline are not responsible for damage, equipment failure, injury, or other loss resulting from improper installation or use of the product.
If you are uncomfortable installing the CT-Pros, have them installed by a qualified bow technician.
Make tuning your Mathews bow easier without a bow press.
The CT-Pro Cable Tuners were developed by Unbound Archery and Bloodline to give archers a simple way to make cable and timing adjustments without needing a traditional bow press.
Designed to work with any Mathews compound bow from the past 10 years that uses the plastic yoke rings, the CT-Pros make tuning, timing adjustments, and bow setup quicker and more convenient.
FEATURES
• Fits Mathews bows from the past 10 years that use plastic yoke rings
• Allows cable and timing adjustments without a bow press
• Great for bow tuning and setup
• Developed by Unbound Archery + Bloodline
• Built for bowhunters and archers
CABLE REQUIREMENTS
Your existing yokes can remain the same length. You will need new cables built by a string builder, and the cable lengths need to be 1 1/8” shorter than the factory cable length.
SHIPPING
Orders will ship within 1–2 weeks maximum.
IMPORTANT SAFETY DISCLAIMER
Proper installation is the customer’s responsibility.
Always make sure the yokes are fully seated in the CT-Pro Cable Tuners before drawing the bow by hand or using a draw board.
If the yokes are not fully seated, drawing the bow can cause the bow to derail, potentially resulting in serious damage or injury.
DO NOT draw the bow until you have verified that the yokes are properly and completely seated.
Unbound Archery and Bloodline are not responsible for damage, equipment failure, injury, or other loss resulting from improper installation or use of the product.
If you are uncomfortable installing the CT-Pros, have them installed by a qualified bow technician.